GPSI-3900E

This video walks you through the following steps in the installation on process:

  1. Install the external antenna, and route the cable.
  2. Locate wires with proper voltage for constant and switch power.
  3. Connect the constant, switch, and ground wires.
  4. – INSTALL OPTIONAL ADD-ONS –

  5. Connect the antenna cables to the device.
  6. Tape the harness wires, and connect the harness to the device.
  7. Mount the device high within the dash.
  8. Verify installation, and tamper-proof remaining connections.
This entry was posted in   .
Bookmark the   permalink.