AT-3000 Installation
In this video, we’ll review the conventional hardwire installation process for the AT-3000 tracking device.
Page 3 / 8
AT-3000 Series
Before You Begin The installation kit contains a registration card, the AT-3000 device, eight 8″ cable ties, one Star Washer, one Self-tapping Screw, five Yellow/Blue Heat Shrink Butt Connectors, one heat shrink ring terminal, one grommet, and two bolts with Well Nuts. Additional tools and supplies you will need include are; ink pen, fine-tip marker,…
Telematics Devices and the Effects on Starting Batteries
Vehicles equipped with a telematics device may experience a slight reduction in the number of unutilized days before the starting battery is negatively impacted. This is normal. The telematics device remains on at all times but enters a low-power mode when the vehicle is not in use to conserve battery power. This feature is designed…
AT-3000 Charging Specifications
This article defines the time required to completely recharge the internal battery of an AT-3000 device and provides recharge rates at different time intervals.
ST-1100 Battery Charging System
The ST-1100 Battery Charging System is designed to recharge GPS Insight ST-1100 batteries. Before You Begin This charging system is limited to ST-1100 only It is not possible to overcharge using this charger as the battery pack contains two separate cells and an internal control circuit. This charger (power supply) is only providing power (wattage)…