The ST-1100 Battery Charging System is designed to recharge GPS Insight ST-1100 batteries. Before You Begin This charging system is limited to ST-1100 only It is not possible to overcharge using this charger as the battery pack contains two separate cells and an internal control circuit. This charger (power supply) is only providing power (wattage)…
Questions about the ST-1200? Check out the below. ST-1200 Frequently Asked Questions
The ST-1100/ST-1200 device uses solar power to charge its battery, and only uses cellular networks to develop and receive data. Since the ST-1100/ST-1200 is mainly solar-powered, its reporting functions are different than your average device. Reporting Motion Reporting The ST-1100/ST-1200 begins reporting once a unit has moved for a complete mile. Once the unit hits…
The installation kit contains a registration card, the ST-1100, three 5/16″ (8mm) self-tapping screws, one abrasive pad, two alcohol wipes, one 3M Primer stick, one plastic nut wrench, and two mounting plates. Additional tools and supplies that you may need include a cordless drill, 1/8″ (3mm) drill bit, 5/16″ (8mm) nut driver drill attachment, silicone,…
Depending on the type of issue(s) you’re experiencing, you may need to perform a device reset or prepare the device for a full battery recharge.
