The installation kit contains a registration card, the TTC-1000, four 8mm #10 self-tapping screws, four 8mm bolts, eight washers, four locking nuts, and one activation magnet. Additional tools and supplies you need include a cordless drill and one 8mm drill bit. Complete the registration card by locating the ten-digit serial number (ESN) on the side…
This is a satellite-only, battery-powered asset tracking device is ideal for tracking non-powered equipment located in remote areas with little or no cellular coverage.
The installation kit contains one temperature sensor, one p-clamp, two heat shrink butt connectors, two standard butt connectors, two grommets, eight 8 in. (20 cm) cable ties with screw hole, twelve 8 in. (20 cm) cable ties, nine self-tapping screws, and 18 ft. cable extension. Additional tools and parts you may need include electrical tape,…
The installation kit contains a registration card, TT-2200 device, four well nuts, and four socket cap screws. Additional tools and supplies that you may need include a fine-tip marker, cordless drill, 1/4 in. (7 mm) drill bit, Phillips-head screw driver, 7/64 in. (2.78 mm) hex key, and a ladder. Covert Installation: Though the device may…
Required tools and supplies include a Phillips-head screw driver and four L92 Ultimate Lithium AAA batteries.
