If your PNP-3000 Series device is not working, please use the following troubleshooting steps to reset the pinhole. PNP-3000 Series Pinhole Reset Procedure Find the device reset pinhole. Insert a small, unfolded paperclip or similar object and push in until you feel or hear a click. Plug the device back into the OBD II port…
The BLE Keyfob allows drivers to assign themselves to vehicles, communicate messages, and trigger emergency messages at the click of a button! Using the Bluetooth (BLE) Keyfob Prior to using a keyfob, it’s recommended that users register their fobs to their respective drivers. For steps on how to register, see: Driver Assignment via Keyfob. The…
Questions about the PNP-3000 Series? Check out the below. PNP-3000 Series Frequently Asked Questions
The following OBD-II Connector Bracket Kit sheet breaks down which bracket corresponds with the correct vehicle.
The installation kit contains a registration card, the PNP device, one diagnostic Pass-Thru cable, one mounting bracket, five 8” cable ties and six 14” cable ties. Additional tools that you may need include an ink pen, dash panel removers, socket/screwdriver set, flush cutters, and tamper seal. For install verification and device registration, visit verifygps.gpsinsight.com and…