AT-3000 Series | Devices | GPS Insight Help Center

AT-3000 FAQ

Last Updated on July 21st, 2020 by Erica Cinner

Questions about the AT-3000? We’ve got answers. Please see the following frequently asked questions about the AT-3000 device. AT-3000 Frequently Asked Questions

Accessory: AT-3000 Inputs

Last Updated on December 3rd, 2018 by Erica Cinner

Additional tools you may need include a multi-meter, insulated wire crimper, wire stripper, 12 VDC or 24 VDC weatherproof relay and relay harness, 20ga or larger wire, star washer, self-tapping screw, heat shrinking terminal, in-line fuse holder, diode, heat gun, cable ties, and heat shrink butt connectors. Installation Overview The following steps provide an overview…

Accessory: AT-3000 Temperature Sensor

Last Updated on August 2nd, 2018 by Erica Cinner

The installation kit contains one temperature sensor, one p-clamp, two heat shrink butt connectors, two standard butt connectors, two grommets, eight 8 in. (20 cm) cable ties with screw hole, twelve 8 in. (20 cm) cable ties, nine self-tapping screws, and 18 ft. cable extension. Additional tools and parts you may need include electrical tape,…

AT-3000

Last Updated on January 29th, 2016 by Erica Cinner

This externally powered asset tracking device is ideal for heavy equipment, generators, diggers, trailers, and other assets that can act as a power source to the GPS tracking device.