Before You Begin The installation kit contains two fobs, panic button receiver, light, two inline fuse holders, two fuses, 4 ft. (1.2 m.) extension cable, self-tapping screw, ring terminal, star washer, six heat shrink butt connectors, eight 8 in. (20 cm.) cable ties, and two 14 in. (35.5 cm.) cable ties. Additional tools needed include…
The Driver ID kit contains one Reader, two key fobs, one plastic washer, one metal locking washer, four heat-shrink butt connectors, four 8 in. (20 cm) cable ties, and one panel mount Light/Buzzer combo. Additional tools and supplies needed; cordless drill, 3/8 in. (10 mm) drill bit, 15/16 in. (24 mm) drill bit, wire strippers,…
In this video, we’ll review the conventional hardwire installation process for the AT-3000 tracking device.
Before You Begin The installation kit contains a registration card, the AT-3000 device, eight 8″ cable ties, one Star Washer, one Self-tapping Screw, five Yellow/Blue Heat Shrink Butt Connectors, one heat shrink ring terminal, one grommet, and two bolts with Well Nuts. Additional tools and supplies you will need include are; ink pen, fine-tip marker,…
This article defines the time required to completely recharge the internal battery of an AT-3000 device and provides recharge rates at different time intervals.