PNP-3000

This video walks you through the following steps in the installation on process:

  1. Locate the vehicle’s OBD-II port, and ensure proper voltage.
  2. Free up existing OBD-II port.
  3. Assemble mounting bracket, and connect bypass connector into vehicle’s OBD-II port.
  4. Mount the replacement OBD-II port, and pull cable through the dash.
  5. Connect the PNP device to the end of the bypass cable.
  6. Mount and secure the device vertically high within the dash (cable on bottom side).
  7. Verify installation, and tamper-proof remaining connections.

If you do not use the optional bypass cable to conceal installation, simply plug the device into the vehicle’s OBD-II port, and call for activation verification.

This entry was posted in   .
Bookmark the   permalink.