List of Events

Below are the full lists of events and statuses available in Driver Logs for ELD Flex.

  • Status Events

    • OffDuty
    • Sleeper
    • Driving
    • OnDuty ND
    • WaitingAtSite: Waiting at Well Site (for oilfield/construction exception)

  • Remark Events

    • Authentication Remark – This is the login to the application by the driver
    • Unauthenticate Remark – This is the Logout of the application by the driver
    • Co-driver login Remark – Login of a Co-Driver in a Primary Driver’s log
    • ELD Connection – Connection to the Engine Control Device
    • ELD Disconnection – Disconnection of the Engine Control Device
    • Switch Vehicle Remark
    • Switch Trailer Remark
    • Switch Vehicle and Trailer Remark
    • Start Hour of the day Changed Remark
    • State/Country Border Crossing Remark
    • Off Road Remark – When drivers moves to Off Road mode
    • On Road Remark – When driver moves back to On Road after Off Road

  • Intermediate Events

    • Inter: Auto 60 Min Location – Every hour an Intermediate event must be written while in a Driving state to capture location/odometer/engine hours

  • Personal Conveyance and Yard Moves

    • PersonalUse: Personal Use
    • YardMoves: Yard Moves
    • ClearPU: Clear Personal Use
    • ClearYM: Clear Yard Moves

  • Certification

    • Certify – Shows the time that a particular day’s log was Certified by the Driver

  • Power Cycle

    • PowerOn: Power on of the vehicle when connected to ECM device
    • PowerOff: Power off of the vehicle when connected to ECM device

  • Diagnostic Events & Malfunctions

    • MalPower: Power Malfunction
    • MalSync: Engine Synchronization Malfunction
    • MalTime: Timing Malfunction
    • MalPos: Position Malfunction
    • MalRecord: Data Recording Malfunction
    • MalTransfer: Data Transfer Malfunction
    • MalOther: Other Malfunction
    • MalPowerClear: Power Malfunction Cleared
    • MalSyncClear: Engine Synchronization Malfunction Cleared
    • MalTimeClear: Timing Malfunction Cleared
    • MalPosClear: Position Malfunction Cleared
    • MalRecordClear: Data Recording Malfunction Cleared
    • MalTransferClear: Data Transfer Malfunction Cleared
    • MalOtherClear: Other Malfunction Cleared
    • DiagPower: Power Diagnostic
    • DiagSync: Engine Synchronization Diagnostic
    • DiagMissing: Missing Required Data Elements Diagnostic
    • DiagTransfer: Data Transfer Diagnostic
    • DiagUnidentified: Unidentified Driver Diagnostic
    • DiagOther: Other Diagnostic
    • DiagPowerClear: Power Diagnostic Cleared
    • DiagSyncClear: Engine Synchronization Diagnostic Cleared
    • DiagMissingClear: Missing Required Data Elements Diagnostic Cleared
    • DiagTransferClear: Data Transfer Diagnostic Cleared
    • DiagUnidentifiedClear: Unidentified Driver Diagnostic Cleared
    • DiagOtherClear: Other Diagnostic Cleared