The installation kit contains the temperature sensor, one p-clamp, two heat-shrink butt connectors, two standard butt connectors, two grommets, eight 8-in. (20 cm) cable ties with screw holes, twelve 8-in. (20 cm) cable ties, nine self-tapping screws, and one 18-ft. cable extension. Additional tools and parts you may need include electrical tape, insulated wire crimper,…
The 4000 device is equipped with four inputs, which can be enabled upon request. To submit a request, contact the Support Team. Additional tools and/or parts that you may need include: razor knife, electrical tape, zip ties, wire crimper, wire stripper, wire cutter, 12V or 24V relay, relay harness, 20ga wire, ground screw, ring terminal,…
The installation kit contains a registration card, the 4000LD device, one external antenna, one 4-pin power harness, one 22-pin expansion harness, one vPOD cable, one OBD-II bypass cable, one L-shaped OBD-II bracket, one Android MDT (tablet), one MDT dock, one ELD data cable, one RAM mount (incl. backing plate and applicable hardware), four 2.5 mm.…
The ELD-2000 is an Android tablet with e-logs, DVIR, navigation, and messaging, paired with a GPSI-4000HD tracking device for location intelligence with Hours of Service management.